基于3×3平行排列耦合器的全光光开关的特性分析

提出了一种新型的基于3×3平行排列耦合器的全光光开关。此种光开关具有两个独立的输出端口且具有极好的偏振稳定性,消光比可达20dB。介绍了其工作原理,详细分析了信号光强度、控制光强度、光纤长度及耦合器分光比偏差等因素对各端口消光比的影响。比较了不同种类和长度光纤环的开关性能,首次得到了耦合器分光比偏差对消光比的影响曲线。     

声诱饵仿真试验系统

文章介绍了声诱饵仿真试验系统中的有关问题，包括：系统的组成、工作原理、对接装置结构等。建立了对接装置声耦合状态下的数学模型，对近场声压分布进行了仿真计算，得出了匹配材料厚度、发射和接收换能器的选取原则。     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

三维射频加速腔程序包MAFIA的开发和应用

介绍了三维射频加速器计算机辅助设计(CAD)程序包MAFIA的特点、功能及其应用。用CAD的方法实现了射频加速器特别是非轴对称带耦合腔的加速器的三维腔形设计。同时介绍了节省内存、节约机时的模型方法,使得在中小型机器上运行大程序(八万条)成为可能。文章主要对L波段的加速腔进行了数值模拟,并和实验进行了比较,结果符合较好;通过三维数值模拟及图形模拟的方法比较了各种形状谐振腔的性能;计算分析了输入耦合腔及高阶模耦合器对加速腔电磁场分布等参量的影响;提出了加耦合器后谐振频率改变的补偿方法。     

分析布拉格光栅破坏的两纤芯不同的光纤耦合器

进一步推广了描述纤芯不同光纤耦合器的耦合模理论，用于解释被布拉格光栅破坏的两纤芯不同光纤耦合器的耦合现象，理论分析的结果与已报道的实验结果相符，与单独的布拉格光栅所起的反射作用不同,这里布拉格光栅所起的作用主要是引入了强烈的色散，在光栅的频谱范围内使耦合器不再同步，在被布拉格光栅破坏的光纤耦合器的选择性频谱中，其边缘部分出现非常弱的波动，而在其阻带内出现非常强的凹陷。     

时分复用倍乘光脉冲重复率的新型光纤耦合器环状连接法分析

提出并详细分析了一种基于时分复用技术倍乘光脉冲重复率的方法：在２×２光纤耦合器的一个输入口与一个输出口间，接入时延为脉冲列半周期奇数倍的一段光纤使之形成环状连接循环耦合，而在另一输出口获得光脉冲。详细分析了该系统中光纤耦合器耦合比、插入损耗、时延光纤长度的要求，偏差的影响及其调节法，给出了理论公式、结果的计算机模拟与实验介绍；与经典的马赫陈德尔干涉仪接法及近年提出的Ｓａｇｎａｃ环接法进行了比较。该方法特别适用于对窄脉冲列进行串接复用实现重复率的多次倍乘，从而得到数千兆赫至上百千兆赫的高重复率光脉冲     

正方分布的4×4单模光纤熔锥耦合器耦合特性分析

本文以线性耦合波方程为基础,采用散射矩阵的方法讨论了具有正方分布的4×4单模光纤熔锥形耦合器的耦合特性,并与实验作了比较,得到了比较一致的结果。     

Mode selective directional couplers for overmoded waveguide systems

Two types of directional couplers for transverse electric (TE) modes are described: short and multihole couplers, respectively. They selectively pick one mode out of a mode mixture in an overmoded circular waveguide system. Unwanted modes are either statistically kept at low level or are suppressed by destructive interference in the coupling waveguide. Mode selectivity and directivity in multihole couplers oscillate up and down with an increasing number of holes, finally reaching a minimum of approximately 20 dB, unless there are competing modes with rational fractions of the beat wavelength. A multihole coupler for the TE₀₂ mode (28 GHz, 63.4 mm waveguide diameter, 41 holes) and a length of 1.6 m shows a calculated directivity of 68 dB and suppresses the unwanted modes TE₀₁ with 34 dB (24 dB), TE₂₂ with 37 dB (45 dB), and further modes TE_m (<5, m<6) with 17 dB to 34 dB in forward direction (figures in parentheses are for unwanted modes propagating in backward direction).A short directional coupler for the TE₀₁ mode (28 GHz, 63.4 mm waveguide diameter) with 16 holes and a length of 230 mm shows a directivity of 55 to 100 dB between 27.9 and 28.1 GHz, suppressing the TE₀₂ mode with 35 to 80 dB, the TE₀₃ mode with 30 to 65 dB, and the TE₂₂ mode with 30 to 70 dB.     

Monolithically integrated 64‐channel silicon hybrid demultiplexer enabling simultaneous wavelength‐ and mode‐division‐multiplexing

A compact 64‐channel hybrid demultiplexer based on silicon‐on‐insulator nanowires is proposed and demonstrated experimentally to enable wavelength‐division‐multiplexing and mode‐division‐multiplexing simultaneously in order to realize an ultra‐large capacity on‐chip optical‐interconnect link. The present hybrid demultiplexer consists of a 4‐channel mode multiplexer constructed with cascaded asymmetrical directional‐couplers and two bi‐directional 17 × 17 arrayed‐waveguide gratings (AWGs) with 16 channels. Here each bi‐directional AWG is equivalent as two identical 1 × 16 AWGs. The measured excess loss and the crosstalk for the monolithically integrated 64‐channel hybrid demultiplexer are about ‐5 dB and ‐14 dB, respectively. Better performance can be achieved by minimizing the imperfections (particularly in AWGs) during the fabrication processes.

     

基于少模光纤的全光纤熔融模式选择耦合器的设计及实验研究

提出了三种基于少模光纤的全光纤熔融模式选择耦合器. 根据模式匹配原理采用单模光纤与少模光纤熔融连接方式, 运用耦合模理论及光束传播法模拟分析了模式选择耦合器的结构参数对模式选择及耦合特性的影响, 实现了单模光纤中基模到少模光纤中不同阶模式的转换, 以满足不同的应用需求. 实验上以2× 2熔融光纤耦合器为例, 采用对称和非对称熔融拉锥方式, 分别实现了从基模到LP₁₁, LP₂₁模式的转换. 实验结果表明所得到的LP₁₁, LP₂₁模式在1530–1560 nm的波长带宽范围内均有较高的模式纯净度, 且模式耦合效率高于80%, 与理论模拟结果基本一致.